STO CORP.

ACRYLAPRIME

Interior and exterior acrylic coatings for use on concrete, masonry, stucco finishes, EIFS finishes, fiber cement board, wood and drywall;

ADVANCED CAVITY WALL SYSTEMS

Non-metal building materials, namely, a backup wall assembly system comprised of fully processed plastics in the nature of foam plastic insulation and plastic filament, and liquid-applied coatings that is inserted between a structural support or sheathing and the exterior wall cladding to provide water proofing and/or an air and moisture barrier and/or a sound control mechanism and/or drainage and/or sheer strength augmentation and/or earthquake resistance;CAVITY WALL SYSTEM;

AIRSEAL

AIR SEAL;Sealer coatings for use in an air protection and/or moisture protection membrane system;

ARCHITRENDS

On-line journals, namely, blogs featuring articles and discussions in the field of building and construction;ARCHITECT TRENDS;

BTS XTRA

In the statement, line 1, GEORGIA should be deleted, and NEW YORK should be inserted.;Cement mixes, namely, a one component polymer modified cement based material used as a lightweight adhesive and base coat;BTS-EXTRA;

BUILDING WITH CONSCIENCE

Custom manufacture of the following building materials, products and supplies: high performance polymer additives for use with a ready-mixed finish coating for concrete, masonry or plaster walls; high performance polymer additives for use with finish coating for concrete, masonry or plaster walls; finishes for stucco, air and moisture barrier coatings in the nature of a paint to be applied onto exterior wall sheathing with a roller, trowel or a spray pump; moisture barrier joint compounds to be applied onto exterior wall sheathing board joints and rough openings in wall construction with a trowel; waterproofing air barriers, namely, a seamless air and moisture protection system beneath exterior wall surfaces, paint primers, high performance polymer additives sold as a component of a ready-mixed finish coating for concrete, masonry or plaster walls; paints and colorings used to enhance the aesthetic appearance of structures, decorative interior and exterior coatings in the nature of fine variegated aggregate encased in a pure acrylic binder; protective coatings in the nature of paints, water sealants and barriers; water based coating for priming and sealing cementitious building substrates, namely, primers and sealants in the nature of paints, acrylic coatings for use over cementitious substrates, concrete, masonry, stucco finishes, exterior insulation and finish system finishes, fiber cement board, wood and drywall; waterproofing undercoats for exterior coating applications for structures, namely, undercoats in the nature of paints, sealer coatings used in an air protection and/or moisture protection systems, acrylic-based interior and exterior wall finishes designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; direct applied high impact, moisture resistant exterior wall finish systems that provide resistance to abuse and weather comprised of waterproof sealants, cement or glass fiber mat based gypsum sheeting; reinforced base coat and a polymer based exterior finish; exterior insulation and finish systems to provide decoration and protection to buildings consisting of adhesive attachment of insulation board; base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating; an exterior insulation and finish system to provide decoration and protection to buildings consisting of adhesive attachment of insulation board; base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating in combination with a liquid-applied air and moisture barrier installed on the substrate; adhesives and base coats used in an exterior insulation and finish system for exterior walls in the nature of polymer-modified cement based material; mesh used for impact resistance in an exterior insulation and finish systems in the nature of a coated glass fiber fabric; moisture barrier joint compound to be applied onto exterior wall sheathing board joints and rough openings in wall construction with a trowel; acrylic-based interior and exterior wall finish designed to look and feel like natural stone that can be applied over concrete masonry, exterior insulation and finish systems or gypsum wall boards; waterproofing air barriers, namely, a seamless air and moisture protection system consisting of either a non-woven cloth reinforcement, a spunbond polyester fabric laminated to rubberized asphalt adhesive or a glass fiber self-adhesive mesh combined with an acrylic-based latex coating, each of which is then treated with a water-based latex coating, all beneath exterior wall surfaces; finishes for walls, namely, interior and external surface finish for commercial and residential applications, namely, synthetic resin wall covering in the nature of plaster, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, bonding cement, plaster, and stucco; non-metal water repellant wall cladding for use on residential or commercial wall construction including a drainage cavity and a secondary weather resistive barrier wall assembly; insulated plastic exterior siding; natural and artificial building stones; building materials, namely, cement mixes, non-agricultural lime for use in construction, plaster, gravel, indoor and outdoor casting mixes composed of artificial material for making jointless wall-coating by spreading, smoothing, scraping and rough plastering; cement mixes, namely, a one component polymer modified cement based material used as an adhesive and base coat; ready-mixed silicone emulsions plaster; silicone emulsion plaster type coatings for concrete, masonry or stucco and mortars;In the statement, Column 1, lines 1-4, are deleted, and Sto Corp (New York Corporation) Building 1400, Suite 120 , 3800 Camp Creek Parkway Atlanta, Georgia 30331 should be inserted.;

CREATIVITY BEGINS. STO FINISHES.

Continuing education services, namely, providing live and on-line continuing professional education seminars in the field of building design and construction;

CREATIVITY BEGINS. STO FINISHES.

Consulting in the field of building design and construction; Technical consulting in the field of exterior wall systems;Consulting in the fields of engineering and architecture; color analysis for the purposes of interior and exterior building design; interior and exterior building design consulting services; design consulting in the field of exterior wall systems;

CREATIVITY BEGINS. STO FINISHES.

Finish for walls, namely, interior and external surface finish for commercial and residential applications, namely, synthetic resin wall covering in the nature of plaster;Exterior insulation and finish system to provide decoration and protection to buildings consisting of adhesive attachment of insulation board, base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating; an exterior insulation and finish system to provide decoration and protection to buildings consisting of adhesive attachment of insulation board, base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating in combination with a liquid-applied air and moisture barrier installed on the substrate; acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards;Finishes, namely, acrylic finish coating to be applied over stucco; paints; decorative interior and exterior coatings in the nature of fine variegated aggregate encased in a pure acrylic binder; protective coatings in the nature of paints; acrylic coating for use over cementitious substrates, concrete, masonry, stucco finishes, EIFS finishes, fiber cement board; acrylic-based interior and exterior wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems;

DECOCOAT

In the statement, Column 1, line 1, Georgia should be deleted, and New York should be inserted.;DECORATIVE COAT;Ready-mixed, decorative and protective wall and floor coating;

DESIGNING THE EVOLUTION OF STUCCO

In the statement, Line 1, Georgia should be deleted, and New York should be inserted.;Hard coat stucco systems, namely, an exterior finish system to provide decoration and protection to buildings consisting of a cement stucco base coat, an acrylic-based substrate primer and a ready-mixed, silicone-enhanced elastomeric textured wall finish coating;Exterior insulation and finish system, namely, an exterior insulation and finish system to provide decoration and protection to buildings consisting of adhesive attachment of insulation board, base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating; exterior insulation and finish system, namely, an exterior insulation and finish system to provide decoration and protection to buildings consisting of adhesive attachment of insulation board, base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating in combination with a liquid-applied air and moisture barrier installed on the substrate;

ECOSHAPES

Non-metallic building materials, namely, building facades with prefabricated render elements;

EPOCRYL

waterbased synthetic acrylic/epoxy polymer which is an integral component of an adhesive bonding intermediary for use as a hardener, sealer, conditioner, for application to stucco, plaster, masonry and concrete surfaces;

EXTRASEAL

EXTRA SEAL;Sealer coatings for use in an air protection and/or moisture protection membrane system;

GRANITEX

In the statement, Column 1, line 1, Georgia should be deleted, and New York should be inserted.;Acrylic-based interior and exterior wall finish coating and finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and gypsum wall boards, specifically excluding multi-textured acrylic in the form of molded plastic substances for use with spa shell finishes or manufactured as a shell for a spa or any other spa component;

HOT PRIME

Water based coating for priming and sealing cementitious building substrates;PRIME;

HYDROTIGHT

HYDRO-TIGHT;Waterproofing undercoat for exterior coating applications for structures;

MICROSTO

micro-sto;micro silicon additives to exterior wall coatings to provide faster drying, better adhesion and cohesion, superior workability, improved abrasion resistance, increased bonding, increased strength at all ages, and reduced permeability and absorption;

NEXT

Waterproofing air barrier, namely, a seamless air and moisture protection system consisting of either a non-woven cloth reinforcement, a spunbond polyester fabric laminated to rubberized asphalt adhesive or a glass fiber self-adhesive mesh combined with an acrylic-based latex coating, each of which is then treated with a water-based latex coating, all beneath exterior wall surfaces;In the statement, Column 1, line 1, Georgia should be deleted, and New York should be inserted.;

OMNIGARD

OMNI GARD;Interior and exterior acrylic coatings for use on concrete, masonry, stucco finishes, EIFS finishes, fiber cement board, wood and drywall;

ONE COMPANY. ANY BUILDING. ANY WALL. ANY LOOK.

Continuing education services, namely, providing live and on-line continuing professional education seminars in the field of building design and construction;Finish for walls, namely, interior and external surface finish for commercial and residential applications, namely, synthetic resin wall covering in the nature of plaster; stucco in the nature of decorative concrete overlays, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, bonding cement, plaster, and stucco in the nature of decorative concrete overlays; non-metal water repellant wall cladding for use on residential or commercial wall construction including a drainage cavity and a secondary weather resistive barrier wall assembly; natural and artificial building stones; building materials, namely, cement mixes, non-agricultural lime for use in construction, plaster, gravel, indoor and outdoor casting mixes composed of artificial material in the nature of refractory castable mixes not of metal for making jointless wall-coating by spreading, smoothing, scraping and rough plastering; cement mixes, namely, a one component polymer modified cement based material used as an adhesive and base coat; ready-mixed silicone emulsions plaster; plaster for use in building, namely, silicone emulsion plaster coatings for concrete, masonry or stucco; adhesives and base coats used in an exterior insulation and finish system (EIFS) for exterior walls, namely, cement mixes in the nature of polymer-modified, cement material; wall panels not of metal, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards;Direct applied high impact, moisture resistant exterior wall finish systems that provide resistance to abuse and weather, comprised of waterproof sealants, cement or glass fiber mat based gypsum sheeting, reinforced base coat and polymer based exterior finish; exterior insulation and finish system to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh, and acrylic polymer-based wall finish coating; exterior insulation and finish systems to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating in combination with a liquid-applied air and moisture barrier installed on the substrate; mesh used for impact resistance in an exterior insulation and finish systems (EIFS) in the nature of a coated glass fiber fireproof textile; sealant compounds for joints, namely, moisture barrier joint compound to be applied onto exterior wall sheathing board joints and rough openings in wall construction with a trowel; building insulation, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; waterproofing air barrier, namely, a seamless air and moisture protection system consisting of adhesive sealants in the nature of rubberized asphalt adhesive laminated with spunbond polyester fabric and nonwoven cloth reinforcement, glass fiber self-adhesive mesh, and also including acrylic-based latex coating and water-based latex coating, for use beneath exterior wall surfaces; insulated plastic exterior siding; protective coatings in the nature of water sealants and barriers in the nature of waterproof sealants;Consulting in the field of building construction; technical consulting in the field of installation of exterior wall systems;Finishes, namely, acrylic finish coating to be applied over stucco; air and moisture barrier coating in the nature of a paint to be applied onto exterior wall sheathing with a roller, trowel or a spray pump; waterproofing air barrier, namely, a seamless air and moisture protection coating beneath exterior wall surfaces; paint primers; high performance polymer additive sold as a component of a ready-mixed finish coating for concrete, masonry or plaster walls; paints; colorings, namely, color pigments used to enhance the aesthetic appearance of structures; decorative interior and exterior coatings in the nature of fine variegated aggregate encased in a pure acrylic binder; protective coatings in the nature of paints, water sealants and barriers in the nature of industrial sealants for waterproofing, water based coating for priming and sealing cementitious building substrates, namely, primers and sealants in the nature of paints; acrylic coating for use over cementitious substrates, concrete, masonry, stucco finishes, exterior insulation and finish system (EIFS) finishes, fiber cement board, wood and drywall; waterproofing undercoat for exterior coating applications for structures, namely, undercoats in the nature of paints; sealer coatings used in an air protection and/or moisture protection system; acrylic-based interior and exterior wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; coatings comprised of stucco, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, stucco in the nature of coatings comprised of stucco; decorative coating for concrete blocks, masonry blocks, and stucco walls, namely, silicone emulsion coatings comprised of cement synthetic plasters;Consulting in the fields of engineering and architecture; color analysis for the purposes of interior and exterior building design; interior and exterior building design consulting services; design consulting in the field of exterior wall systems; consulting in the field of building design; technical consulting in the field of design of exterior wall systems;

ONE PANEL. ANY AESTHETIC.

Continuing education services, namely, providing live and on-line continuing professional education seminars in the field of building design and construction;Finish for walls, namely, interior and external surface finish for commercial and residential applications, namely, synthetic resin wall covering in the nature of plaster; stucco in the nature of decorative concrete overlays, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, bonding cement, plaster, and stucco in the nature of decorative concrete overlays; non-metal water repellant wall cladding for use on residential or commercial wall construction including a drainage cavity and a secondary weather resistive barrier wall assembly; natural and artificial building stones; building materials, namely, cement mixes, non-agricultural lime for use in construction, plaster, gravel, indoor and outdoor casting mixes composed of artificial material in the nature of refractory castable mixes not of metal for making jointless wall-coating by spreading, smoothing, scraping and rough plastering; cement mixes, namely, a one component polymer modified cement based material used as an adhesive and base coat; ready-mixed silicone emulsions plaster; plaster for use in building, namely, silicone emulsion plaster coatings for concrete, masonry or stucco; adhesives and base coats used in an exterior insulation and finish system (EIFS) for exterior walls, namely, cement mixes in the nature of polymer-modified, cement material; wall panels not of metal, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards;Direct applied high impact, moisture resistant exterior wall finish systems that provide resistance to abuse and weather, comprised of waterproof sealants, cement or glass fiber mat based gypsum sheeting, reinforced base coat and polymer based exterior finish; exterior insulation and finish system to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh, and acrylic polymer-based wall finish coating; exterior insulation and finish systems to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating in combination with a liquid-applied air and moisture barrier installed on the substrate; mesh used for impact resistance in an exterior insulation and finish systems (EIFS) in the nature of a coated glass fiber fireproof textile; sealant compounds for joints, namely, moisture barrier joint compound to be applied onto exterior wall sheathing board joints and rough openings in wall construction with a trowel; building insulation, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; waterproofing air barrier, namely, a seamless air and moisture protection system consisting of adhesive sealants in the nature of rubberized asphalt adhesive laminated with spunbond polyester fabric and nonwoven cloth reinforcement, glass fiber self-adhesive mesh, and also including acrylic-based latex coating and water-based latex coating, for use beneath exterior wall surfaces; insulated plastic exterior siding; protective coatings in the nature of water sealants and barriers in the nature of waterproof sealants;Consulting in the field of building construction; technical consulting in the field of installation of exterior wall systems;Finishes, namely, acrylic finish coating to be applied over stucco; air and moisture barrier coating in the nature of a paint to be applied onto exterior wall sheathing with a roller, trowel or a spray pump; waterproofing air barrier, namely, a seamless air and moisture protection coating beneath exterior wall surfaces; paint primers; high performance polymer additive sold as a component of a ready-mixed finish coating for concrete, masonry or plaster walls; paints; colorings, namely, color pigments used to enhance the aesthetic appearance of structures; decorative interior and exterior coatings in the nature of fine variegated aggregate encased in a pure acrylic binder; protective coatings in the nature of paints, water sealants and barriers in the nature of industrial sealants for waterproofing, water based coating for priming and sealing cementitious building substrates, namely, primers and sealants in the nature of paints; acrylic coating for use over cementitious substrates, concrete, masonry, stucco finishes, exterior insulation and finish system (EIFS) finishes, fiber cement board, wood and drywall; waterproofing undercoat for exterior coating applications for structures, namely, undercoats in the nature of paints; sealer coatings used in an air protection and/or moisture protection system; acrylic-based interior and exterior wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; coatings comprised of stucco, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, stucco in the nature of coatings comprised of stucco; decorative coating for concrete blocks, masonry blocks, and stucco walls, namely, silicone emulsion coatings comprised of cement synthetic plasters;Consulting in the fields of engineering and architecture; color analysis for the purposes of interior and exterior building design; interior and exterior building design consulting services; design consulting in the field of exterior wall systems; consulting in the field of building design; technical consulting in the field of design of exterior wall systems;

ONE PANEL. ANY BUILDING. ANY WALL. ANY LOOK.

Continuing education services, namely, providing live and on-line continuing professional education seminars in the field of building design and construction;Finish for walls, namely, interior and external surface finish for commercial and residential applications, namely, synthetic resin wall covering in the nature of plaster; stucco in the nature of decorative concrete overlays, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, bonding cement, plaster, and stucco in the nature of decorative concrete overlays; non-metal water repellant wall cladding for use on residential or commercial wall construction including a drainage cavity and a secondary weather resistive barrier wall assembly; natural and artificial building stones; building materials, namely, cement mixes, non-agricultural lime for use in construction, plaster, gravel, indoor and outdoor casting mixes composed of artificial material in the nature of refractory castable mixes not of metal for making jointless wall-coating by spreading, smoothing, scraping and rough plastering; cement mixes, namely, a one component polymer modified cement based material used as an adhesive and base coat; ready-mixed silicone emulsions plaster; plaster for use in building, namely, silicone emulsion plaster coatings for concrete, masonry or stucco; adhesives and base coats used in an exterior insulation and finish system (EIFS) for exterior walls, namely, cement mixes in the nature of polymer-modified, cement material; wall panels not of metal, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards;Direct applied high impact, moisture resistant exterior wall finish systems that provide resistance to abuse and weather, comprised of waterproof sealants, cement or glass fiber mat based gypsum sheeting, reinforced base coat and polymer based exterior finish; exterior insulation and finish system to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh, and acrylic polymer-based wall finish coating; exterior insulation and finish systems to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating in combination with a liquid-applied air and moisture barrier installed on the substrate; mesh used for impact resistance in an exterior insulation and finish systems (EIFS) in the nature of a coated glass fiber fireproof textile; sealant compounds for joints, namely, moisture barrier joint compound to be applied onto exterior wall sheathing board joints and rough openings in wall construction with a trowel; building insulation, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; waterproofing air barrier, namely, a seamless air and moisture protection system consisting of adhesive sealants in the nature of rubberized asphalt adhesive laminated with spunbond polyester fabric and nonwoven cloth reinforcement, glass fiber self-adhesive mesh, and also including acrylic-based latex coating and water-based latex coating, for use beneath exterior wall surfaces; insulated plastic exterior siding; protective coatings in the nature of water sealants and barriers in the nature of waterproof sealants;Consulting in the field of building construction; technical consulting in the field of installation of exterior wall systems;Finishes, namely, acrylic finish coating to be applied over stucco; air and moisture barrier coating in the nature of a paint to be applied onto exterior wall sheathing with a roller, trowel or a spray pump; waterproofing air barrier, namely, a seamless air and moisture protection coating beneath exterior wall surfaces; paint primers; high performance polymer additive sold as a component of a ready-mixed finish coating for concrete, masonry or plaster walls; paints; colorings, namely, color pigments used to enhance the aesthetic appearance of structures; decorative interior and exterior coatings in the nature of fine variegated aggregate encased in a pure acrylic binder; protective coatings in the nature of paints, water sealants and barriers in the nature of industrial sealants for waterproofing, water based coating for priming and sealing cementitious building substrates, namely, primers and sealants in the nature of paints; acrylic coating for use over cementitious substrates, concrete, masonry, stucco finishes, exterior insulation and finish system (EIFS) finishes, fiber cement board, wood and drywall; waterproofing undercoat for exterior coating applications for structures, namely, undercoats in the nature of paints; sealer coatings used in an air protection and/or moisture protection system; acrylic-based interior and exterior wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; coatings comprised of stucco, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, stucco in the nature of coatings comprised of stucco; decorative coating for concrete blocks, masonry blocks, and stucco walls, namely, silicone emulsion coatings comprised of cement synthetic plasters;Consulting in the fields of engineering and architecture; color analysis for the purposes of interior and exterior building design; interior and exterior building design consulting services; design consulting in the field of exterior wall systems; consulting in the field of building design; technical consulting in the field of design of exterior wall systems;

ONE PANEL. ANY FACADE.

Continuing education services, namely, providing live and on-line continuing professional education seminars in the field of building design and construction;Finish for walls, namely, interior and external surface finish for commercial and residential applications, namely, synthetic resin wall covering in the nature of plaster; stucco in the nature of decorative concrete overlays, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, bonding cement, plaster, and stucco in the nature of decorative concrete overlays; non-metal water repellant wall cladding for use on residential or commercial wall construction including a drainage cavity and a secondary weather resistive barrier wall assembly; natural and artificial building stones; building materials, namely, cement mixes, non-agricultural lime for use in construction, plaster, gravel, indoor and outdoor casting mixes composed of artificial material in the nature of refractory castable mixes not of metal for making jointless wall-coating by spreading, smoothing, scraping and rough plastering; cement mixes, namely, a one component polymer modified cement based material used as an adhesive and base coat; ready-mixed silicone emulsions plaster; plaster for use in building, namely, silicone emulsion plaster coatings for concrete, masonry or stucco; adhesives and base coats used in an exterior insulation and finish system (EIFS) for exterior walls, namely, cement mixes in the nature of polymer-modified, cement material; wall panels not of metal, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards;Direct applied high impact, moisture resistant exterior wall finish systems that provide resistance to abuse and weather, comprised of waterproof sealants, cement or glass fiber mat based gypsum sheeting, reinforced base coat and polymer based exterior finish; exterior insulation and finish system to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh, and acrylic polymer-based wall finish coating; exterior insulation and finish systems to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating in combination with a liquid-applied air and moisture barrier installed on the substrate; mesh used for impact resistance in an exterior insulation and finish systems (EIFS) in the nature of a coated glass fiber fireproof textile; sealant compounds for joints, namely, moisture barrier joint compound to be applied onto exterior wall sheathing board joints and rough openings in wall construction with a trowel; building insulation, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; waterproofing air barrier, namely, a seamless air and moisture protection system consisting of adhesive sealants in the nature of rubberized asphalt adhesive laminated with spunbond polyester fabric and nonwoven cloth reinforcement, glass fiber self-adhesive mesh, and also including acrylic-based latex coating and water-based latex coating, for use beneath exterior wall surfaces; insulated plastic exterior siding; protective coatings in the nature of water sealants and barriers in the nature of waterproof sealants;Consulting in the field of building construction; technical consulting in the field of installation of exterior wall systems;Finishes, namely, acrylic finish coating to be applied over stucco; air and moisture barrier coating in the nature of a paint to be applied onto exterior wall sheathing with a roller, trowel or a spray pump; waterproofing air barrier, namely, a seamless air and moisture protection coating beneath exterior wall surfaces; paint primers; high performance polymer additive sold as a component of a ready-mixed finish coating for concrete, masonry or plaster walls; paints; colorings, namely, color pigments used to enhance the aesthetic appearance of structures; decorative interior and exterior coatings in the nature of fine variegated aggregate encased in a pure acrylic binder; protective coatings in the nature of paints, water sealants and barriers in the nature of industrial sealants for waterproofing, water based coating for priming and sealing cementitious building substrates, namely, primers and sealants in the nature of paints; acrylic coating for use over cementitious substrates, concrete, masonry, stucco finishes, exterior insulation and finish system (EIFS) finishes, fiber cement board, wood and drywall; waterproofing undercoat for exterior coating applications for structures, namely, undercoats in the nature of paints; sealer coatings used in an air protection and/or moisture protection system; acrylic-based interior and exterior wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; coatings comprised of stucco, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, stucco in the nature of coatings comprised of stucco; decorative coating for concrete blocks, masonry blocks, and stucco walls, namely, silicone emulsion coatings comprised of cement synthetic plasters;Consulting in the fields of engineering and architecture; color analysis for the purposes of interior and exterior building design; interior and exterior building design consulting services; design consulting in the field of exterior wall systems; consulting in the field of building design; technical consulting in the field of design of exterior wall systems;

ONE PANEL. ANY LOOK.

Continuing education services, namely, providing live and on-line continuing professional education seminars in the field of building design and construction;Finish for walls, namely, interior and external surface finish for commercial and residential applications, namely, synthetic resin wall covering in the nature of plaster; stucco in the nature of decorative concrete overlays, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, bonding cement, plaster, and stucco in the nature of decorative concrete overlays; non-metal water repellant wall cladding for use on residential or commercial wall construction including a drainage cavity and a secondary weather resistive barrier wall assembly; natural and artificial building stones; building materials, namely, cement mixes, non-agricultural lime for use in construction, plaster, gravel, indoor and outdoor casting mixes composed of artificial material in the nature of refractory castable mixes not of metal for making jointless wall-coating by spreading, smoothing, scraping and rough plastering; cement mixes, namely, a one component polymer modified cement based material used as an adhesive and base coat; ready-mixed silicone emulsions plaster; plaster for use in building, namely, silicone emulsion plaster coatings for concrete, masonry or stucco; adhesives and base coats used in an exterior insulation and finish system (EIFS) for exterior walls, namely, cement mixes in the nature of polymer-modified, cement material; wall panels not of metal, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards;Direct applied high impact, moisture resistant exterior wall finish systems that provide resistance to abuse and weather, comprised of waterproof sealants, cement or glass fiber mat based gypsum sheeting, reinforced base coat and polymer based exterior finish; exterior insulation and finish system to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh, and acrylic polymer-based wall finish coating; exterior insulation and finish systems to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating in combination with a liquid-applied air and moisture barrier installed on the substrate; mesh used for impact resistance in an exterior insulation and finish systems (EIFS) in the nature of a coated glass fiber fireproof textile; sealant compounds for joints, namely, moisture barrier joint compound to be applied onto exterior wall sheathing board joints and rough openings in wall construction with a trowel; building insulation, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; waterproofing air barrier, namely, a seamless air and moisture protection system consisting of adhesive sealants in the nature of rubberized asphalt adhesive laminated with spunbond polyester fabric and nonwoven cloth reinforcement, glass fiber self-adhesive mesh, and also including acrylic-based latex coating and water-based latex coating, for use beneath exterior wall surfaces; insulated plastic exterior siding; protective coatings in the nature of water sealants and barriers in the nature of waterproof sealants;Consulting in the field of building construction; technical consulting in the field of installation of exterior wall systems;Finishes, namely, acrylic finish coating to be applied over stucco; air and moisture barrier coating in the nature of a paint to be applied onto exterior wall sheathing with a roller, trowel or a spray pump; waterproofing air barrier, namely, a seamless air and moisture protection coating beneath exterior wall surfaces; paint primers; high performance polymer additive sold as a component of a ready-mixed finish coating for concrete, masonry or plaster walls; paints; colorings, namely, color pigments used to enhance the aesthetic appearance of structures; decorative interior and exterior coatings in the nature of fine variegated aggregate encased in a pure acrylic binder; protective coatings in the nature of paints, water sealants and barriers in the nature of industrial sealants for waterproofing, water based coating for priming and sealing cementitious building substrates, namely, primers and sealants in the nature of paints; acrylic coating for use over cementitious substrates, concrete, masonry, stucco finishes, exterior insulation and finish system (EIFS) finishes, fiber cement board, wood and drywall; waterproofing undercoat for exterior coating applications for structures, namely, undercoats in the nature of paints; sealer coatings used in an air protection and/or moisture protection system; acrylic-based interior and exterior wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; coatings comprised of stucco, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, stucco in the nature of coatings comprised of stucco; decorative coating for concrete blocks, masonry blocks, and stucco walls, namely, silicone emulsion coatings comprised of cement synthetic plasters;Consulting in the fields of engineering and architecture; color analysis for the purposes of interior and exterior building design; interior and exterior building design consulting services; design consulting in the field of exterior wall systems; consulting in the field of building design; technical consulting in the field of design of exterior wall systems;

ONE PANEL. ANY VENEER.

Continuing education services, namely, providing live and on-line continuing professional education seminars in the field of building design and construction;Finish for walls, namely, interior and external surface finish for commercial and residential applications, namely, synthetic resin wall covering in the nature of plaster; stucco in the nature of decorative concrete overlays, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, bonding cement, plaster, and stucco in the nature of decorative concrete overlays; non-metal water repellant wall cladding for use on residential or commercial wall construction including a drainage cavity and a secondary weather resistive barrier wall assembly; natural and artificial building stones; building materials, namely, cement mixes, non-agricultural lime for use in construction, plaster, gravel, indoor and outdoor casting mixes composed of artificial material in the nature of refractory castable mixes not of metal for making jointless wall-coating by spreading, smoothing, scraping and rough plastering; cement mixes, namely, a one component polymer modified cement based material used as an adhesive and base coat; ready-mixed silicone emulsions plaster; plaster for use in building, namely, silicone emulsion plaster coatings for concrete, masonry or stucco; adhesives and base coats used in an exterior insulation and finish system (EIFS) for exterior walls, namely, cement mixes in the nature of polymer-modified, cement material; wall panels not of metal, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards;Direct applied high impact, moisture resistant exterior wall finish systems that provide resistance to abuse and weather, comprised of waterproof sealants, cement or glass fiber mat based gypsum sheeting, reinforced base coat and polymer based exterior finish; exterior insulation and finish system to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh, and acrylic polymer-based wall finish coating; exterior insulation and finish systems to provide decoration and protection to buildings consisting of adhesive-attached building insulation board, base coat embedded with coated glass fiber mesh and an acrylic polymer-based wall finish coating in combination with a liquid-applied air and moisture barrier installed on the substrate; mesh used for impact resistance in an exterior insulation and finish systems (EIFS) in the nature of a coated glass fiber fireproof textile; sealant compounds for joints, namely, moisture barrier joint compound to be applied onto exterior wall sheathing board joints and rough openings in wall construction with a trowel; building insulation, namely, acrylic-based interior and exterior insulating wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; waterproofing air barrier, namely, a seamless air and moisture protection system consisting of adhesive sealants in the nature of rubberized asphalt adhesive laminated with spunbond polyester fabric and nonwoven cloth reinforcement, glass fiber self-adhesive mesh, and also including acrylic-based latex coating and water-based latex coating, for use beneath exterior wall surfaces; insulated plastic exterior siding; protective coatings in the nature of water sealants and barriers in the nature of waterproof sealants;Consulting in the field of building construction; technical consulting in the field of installation of exterior wall systems;Finishes, namely, acrylic finish coating to be applied over stucco; air and moisture barrier coating in the nature of a paint to be applied onto exterior wall sheathing with a roller, trowel or a spray pump; waterproofing air barrier, namely, a seamless air and moisture protection coating beneath exterior wall surfaces; paint primers; high performance polymer additive sold as a component of a ready-mixed finish coating for concrete, masonry or plaster walls; paints; colorings, namely, color pigments used to enhance the aesthetic appearance of structures; decorative interior and exterior coatings in the nature of fine variegated aggregate encased in a pure acrylic binder; protective coatings in the nature of paints, water sealants and barriers in the nature of industrial sealants for waterproofing, water based coating for priming and sealing cementitious building substrates, namely, primers and sealants in the nature of paints; acrylic coating for use over cementitious substrates, concrete, masonry, stucco finishes, exterior insulation and finish system (EIFS) finishes, fiber cement board, wood and drywall; waterproofing undercoat for exterior coating applications for structures, namely, undercoats in the nature of paints; sealer coatings used in an air protection and/or moisture protection system; acrylic-based interior and exterior wall finish designed to look and feel like natural stone that can be applied over concrete, masonry, exterior insulation and finish systems or gypsum wall boards; coatings comprised of stucco, namely, cement stucco in the nature of a blend of Portland cement, fibers and chemical additives; cementitious materials, namely, stucco in the nature of coatings comprised of stucco; decorative coating for concrete blocks, masonry blocks, and stucco walls, namely, silicone emulsion coatings comprised of cement synthetic plasters;Consulting in the fields of engineering and architecture; color analysis for the purposes of interior and exterior building design; interior and exterior building design consulting services; design consulting in the field of exterior wall systems; consulting in the field of building design; technical consulting in the field of design of exterior wall systems;

OPTILINK

HIGH PERFORMANCE POLYMER ADDITIVE FOR USE WITH A READY-MIXED FINISH COATING FOR CONCRETE, MASONRY OR PLASTER WALLS;

POWERCRETE

materials for concrete repair;power concrete; power-crete;retail store and mail order services for selling concrete repair materials;

POWERCRYL

In the statement, Column 1, line 1, Georgia Corporation should be deleted, and New York Corporation should be inserted.;POWER CRYL;Coatings in the nature of finishes for stucco;

POWERCURE

POWER CURE;SOLVENT BASED COPOLYMER USED FOR SURFACE CONDITIONER/HARDENER;

POWERFIX

acrylic dispersion based crack filler, polymer modified cement based surface leveler or ground coat and repair preparations, and polyester mesh to provide flexural reinforcement, all for use on stucco, plaster, masonry and concrete;power fix;

POWERFLEX

POWER FLEX;Acrylic coating for use over cementitious substrates;

POWERGRIP

POWER GRIP;epoxy bonding adhesives for bonding new concrete to existing concrete and for use in crack repair and bolt grouting on concrete and mortar substrates;

POWERGROUT

single component, multi-purpose cementitious grout for structural grouting of machine base plates, structural columns, crane rails and anchor bolts;Power Grout;

POWERLASTIC

POWER ELASTIC;WATERBASE ACRYLIC ELASTOMERIC PROTECTIVE COATINGS FOR INTERIOR AND EXTERIOR USE;

POWERLASTIC

Acrylic coating for use over cementitious substrates;

POWERMIX

polymer modified cement based preparation for leveling, patching and repairing existing concrete and mortar;power mix;

POWERPREP

power prepration;water based polymer adhesion/bonding intermediary for use as a hardener, sealer, and conditioner for application to stucco, plaster, masonry and concrete surfaces;

POWERSHIELD

power shield;protective coatings and stains for use on stucco, plaster, masonry and concrete, all for commercial use;

POWERSHOT

repair mortar for repairing deteriorated concrete surfaces;POWER SHOT;

POWERTITE

POWER TIGHT;WATERPROOFING COMPOSITION FOR MASONRY, CONCRETE, AND OTHER CONSTRUCTION SURFACES;

POWERTOP

double component latex mortar for repairing concrete surfaces;

POWERWALL

Cementitious Materials-Namely, Bonding Cement, Plaster, and Stucco;

POWERWALL

CEMENTITIOUS MATERIALS IN THE NATURE OF STUCCO;POWER WALL;

POWERWALL

Cementitious materials, namely, bonding cement, plaster, and stucco;POWER WALL;[Acrylic coating for use over cementitious substrates];

PROD

Building insulation;

R-WALL

INSULATED PLASTIC EXTERIOR SIDING;R WALL;

R-WALL

Exterior Walls for Buildings, Consisting of an Expanded Polystyrene Board Layer, a Fiberglass Reinforcing Fabric Mesh Layer, a Cementitious Combination Primer and Adhesive Layer, and Waterproof, Self-Bonding Acrylic Exterior Layer Having a Stucco-Like Appearance;R WALL;

RAINSCREEN

non-metal water repellant wall cladding for use on residential or commercial wall construction including a drainage cavity and a secondary weather resistive barrier wall assembly;RAIN SCREEN;

RE

The mark consists of two curved arrows forming a circle around the stylized letters RE.;Providing technical information in the fields of maintenance and repair of existing buildings and structures, installation of building insulation to improve energy efficiency, and the use of appropriate products in those fields;REPAIR;Color is not claimed as a feature of the mark.;