CAST METAL BUILDING HARDWARE NAMELY

Brand	Owner (click to sort)	Address	Description
MAGSTOP	RYOBI LTD.	No. 762, Mesaki-cho, Fuchu-shi Hiroshima-ken Japan	Cast Metal Building Hardware-Namely, Floor and Door Hinges, Door Knobs, Door Stops, Door Closers, [ Locks, Anvils, Nails, Screws ] and Non-Mechanical Door Stops Made Primarily of Metal;
MAGSTOPPER	RYOBI LTD.	No. 762, Mesaki-cho, Fuchu-shi Hiroshima-ken Japan	Cast Metal Building Hardware-Namely, Door Closers and Parts Thereof, Floor and Door Hinges, Door Knobs, Door Stops, Locks, Anvils, Window Anchors, Nails and Screws;
	Where the owner name is not linked, that owner no longer owns the brand

Technical Examples

To start up a casting operation in a two-roll casting device without the use of a start-up strand, the method comprises setting an operating casting thickness and rotating the casting rolls at a casting-roll circumferential velocity which corresponds to a starting casting velocity, which is lower than a steady-state operating casting velocity, feeding metal melt into a melt space formed by the rotating casting rolls and the side plates to form a cast metal strip with a substantially constant, predetermined cross-sectional format while at the same time increasing the casting velocity to a strip-forming casting velocity, then increasing the casting velocity to a strip-separating casting velocity, which is significantly higher than a casting velocity which is sufficient for the prevailing full solidification conditions, and separating off the metal strip which has been cast thus far, setting a steady-state operating casting velocity, diverting the subsequent cast metal strip to a strip-conveying device and commencing steady-state casting operation.